DAHDI reports an outgoing call answered on faulty line

Get help with installing, upgrading and running Asterisk.

Moderators: muppetmaster, Moderator, Support

DAHDI reports an outgoing call answered on faulty line

Postby stephend » Fri Oct 09, 2015 9:46 am

My Asterisk system was working fine until a few days ago when a line fault occurred. I have a TDM 410 card connected to two analogue lines. When making an outgoing call through the PBX, Asterisk CLI reports:
Code: Select all
Called DAHDI/g0/<called number>
DAHDI/1-1 answered SIP/214-00000002
Hanging up DAHDI/1-1


There was a line fault and no dial tone on the first line Dahdi tried, yet Dahdi reported it answered. The other line was available and working, but never got tried by Dahdi. Does anyone know how to get a Dahdi channel to report "un-available" or "line-fault" rather than "answered" if there is no dial tone?
stephend
Newsterisk
 
Posts: 3
Joined: Sat Mar 21, 2015 4:21 pm

Return to Asterisk Support

Who is online

Users browsing this forum: Google [Bot] and 1 guest