PA system - prerecorded announcement

Get help with installing, upgrading and running Asterisk.

Moderators: muppetmaster, Moderator, Support

PA system - prerecorded announcement

Postby saving » Thu Oct 22, 2015 1:15 am

See short system description below.
Questions:
- Has anybody done this before with DA IP7 systems? Pointers to resources wellcome. I researched a lot before I posted this, but may still have missed something.
- Can it be done at all? Any tip would help.
- I really need this. Do you know / can you recommend a paid option (support, professional, etc.) to solve this problem for me? You can write to me directly ( savin, dot, gorup at gmail - if you can read this you are not a robot :) with advice whom to hire.

Thank you for your help.

----------------------------------------------------------------------------------------------------

Small, private PA announcement system (no external connections) with
- Asterisk (FreePBX distribution)
- Digital Acoustics IP7/SS20 VoIP amplifier + speaker (8 pcs.)

What works?
-----------
0. Prerequisites
- installed FreePBX
- softphone (linphone) for testing
- configure extension for softphone (Applications/Extensions): use
generic SIP, extension=430,secret=extension

1. Operator announcement on one speaker

- configure VoIP amplifiers (IP address/mask/gateway, enable SIP
protokol, secret=extension, auto answer)
- configure extension for all amplifiers (Applications/Extensions):
use generic SIP, extension=71000..79000,secret=extension
- tested with softphone (dial 71000 etc.)

2. Operator announcement on multiple speaker

- define paging group extension=11111 (Application/Paging and
Intercom/Define new group): select extensions (speakers), apply
- tested with softphone (dial 11111)

3. Prerecorded announcement on one speaker

- announcement file: WAV, 8kHz, mono, 16-bit.
- Settings-Music on hold-Add category-> sound1 -> upload announcement
file (this is for operator feedback!)
- Admin-System recordings-Add -> sound1 -> upload announcement file
(this is for speaker)
- edit dial plan /etc/asterisk/extensions_custom.conf
[from-internal-custom]
exten => _1XXXXX,1,Answer()
exten => _1XXXXX,n,Dial(SIP/${EXTEN:1}, 5, A(custom/sound1)L(1000)m(sound1) )
; etc

A(custom/sound1) - play sound1 as announcement/ringtone
m(sound1) plays music-on-hold to operator (as feedback what is heard
on PA speakers)
L(1000) drops connection 1s after end of announcement
${EXTEN:1} - dialled extension, without 1st digit

- tested with softphone (dial 171000)

What does NOT work?
-------------------

1. Prerecorded announcement on multiple speakers

On dial of extension: Dial multiple speakers (like a paging group),
play announcement file, end connection(s).
Should support multiple extensions with multiple announcement files!
Tried:
- fiddled with dialplan's Dial() options
[app-paging]
...
exten => _PAGE.,1(SKIPCHECK),Macro(autoanswer,${EXTEN:4})
exten => _PAGE.,n,Set(_DOPTIONS=A(good-morning)m(impressive1)L(1000))
exten => _PAGE.,n,Dial(${DIAL},${DTIME},${DOPTIONS})
...

Did not work. m() and L() options were ignored. Announcement was
played, but with certain delay between speakers in group (giving bad
audio quality).

- tried to use Playback()
Did not work. I obviously don't know where in dialplan this should go.
It had no effect on various places I inserted it.
saving
Newsterisk
 
Posts: 1
Joined: Thu Oct 22, 2015 1:03 am

Return to Asterisk Support

Who is online

Users browsing this forum: No registered users and 16 guests