[SOLVED] hangup() AGI fires before call actually ends

Get help with installing, upgrading and running Asterisk.

Moderators: muppetmaster, Moderator, Support

[SOLVED] hangup() AGI fires before call actually ends

Postby abakr2 » Mon Dec 21, 2015 9:25 am

Hi,

I have a call (initiated from a call script) from a local handset to an external number.

Once the external number has finished ringing (i.e. people are connected), the call continues (and parties can speak), but the AGI called on hangup() event is fired. I was actually expecting it to be fired when the parties complete their call, but it isn't! I don't have these problems for incoming calls (for that, my hangup AGI is called at the right time)

The local handset is PJSIP, the external call is made by IAX2.
Any ideas what I should be looking at?

-- IAX2/voipms-11053 answered Local/6004@from-internal-00000047;1
-- Channel Local/6004@from-internal-00000047;1 joined 'simple_bridge' basic-bridge <894491a2-7b63-4fe1-8d3f-1fc4374b3538>
-- Channel IAX2/voipms-11053 joined 'simple_bridge' basic-bridge <894491a2-7b63-4fe1-8d3f-1fc4374b3538>
> Move-swap optimizing Local/6004@from-internal-00000047;1 <-- PJSIP/6004-00000073.
-- Channel PJSIP/6004-00000073 left 'simple_bridge' basic-bridge <1b220528-2b40-4f6b-ab59-01b83388c0d1>
-- Channel Local/6004@from-internal-00000047;1 left 'simple_bridge' basic-bridge <894491a2-7b63-4fe1-8d3f-1fc4374b3538>
-- Channel PJSIP/6004-00000073 swapped with Local/6004@from-internal-00000047;1 into 'simple_bridge' basic-bridge <894491a2-7b63-4fe1-8d3f-1fc4374b3538>
-- Channel Local/6004@from-internal-00000047;2 left 'simple_bridge' basic-bridge <1b220528-2b40-4f6b-ab59-01b83388c0d1>
== Spawn extension (from-internal, 5999, 7) exited non-zero on 'Local/6004@from-internal-00000047;1'
== Spawn extension (from-internal, 6004, 1) exited non-zero on 'Local/6004@from-internal-00000047;2'
-- Local/6004@from-internal-00000047;1 Internal Gosub(hdlr_outgoing,s,1(args)) start

Thanks for any help
Last edited by abakr2 on Mon Dec 21, 2015 11:37 am, edited 1 time in total.
abakr2
Newsterisk
 
Posts: 8
Joined: Fri Jun 26, 2015 6:27 am

[SOLVED] Re: hangup() AGI fires before call actually ends

Postby abakr2 » Mon Dec 21, 2015 11:36 am

I guess this is a classic newbie error.
The answer to the conundrum is to read the article entitled "Local Channel Optimisation"

I just added /n onto my dial command and all was well.

Thanks
abakr2
Newsterisk
 
Posts: 8
Joined: Fri Jun 26, 2015 6:27 am


Return to Asterisk Support

Who is online

Users browsing this forum: Google [Bot] and 1 guest