Eicon Diva 4BRI - Can not select at Wizard-Setup

Get help with installing and running AsteriskNOW.

Moderators: Moderator, Support

Eicon Diva 4BRI - Can not select at Wizard-Setup

Postby ds2k5 » Mon Jan 08, 2007 9:25 am

AsteriskNOW 1.4.0 Beta 2


Hello,

i am a newbee, i shut install a asterisk
i have become from my chef a "Eicon Diva 4BRI" Card.

I have download an burn the ISO from "astersikNOW 1.4.0 Beta 2" (Express Install)
i have installed it on a PC with the "Eicon Diva 4BRI" include.

There is no Analog Connection.

The "Eicon Diva 4BRI" is connectet to a Alkatel "Omni pcx"

If i start the WebGUI-Wizard to configure astersik


Verify Analog Ports: No Analog ports has been detected on your system

Service Providers:

Provider Type: Analog
VoIP
Custom VoIP

but there is no ISDN to select !

My Question is: how can i use the 4BRI with AsteriskNOW ?
Are there drivers needed ?
What i do wrong ?




Kernel: Linux hnttestpbx01 2.6.17.11-1.1.smp.x86.i686.cmov #1 SMP Tue Sep 5 23:07:02 EDT 2006 i686 i686 i386 GNU/Linux


Hardware:
---------

Eicon Diva Card:

03:07.0 Network controller: Eicon Networks Corporation Diva Server 4BRI Rev 2 (rev 01)
Subsystem: Eicon Networks Corporation Diva Server 4BRI-8M 2.0 PCI
Flags: bus master, medium devsel, latency 64, IRQ 177
Memory at e0210000 (32-bit, non-prefetchable) [size=256]
I/O ports at 5000 [size=256]
Memory at e1000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0200000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 1
Capabilities: [48] #06 [0080]
Capabilities: [4c] Vital Product Data

[root@pbx proc]# cat interrupts
CPU0 CPU1
0: 284528 0 IO-APIC-edge timer
1: 1115 0 IO-APIC-edge i8042
8: 1141202 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
12: 131 0 IO-APIC-edge i8042
14: 6252 0 IO-APIC-edge ide0
15: 23 0 IO-APIC-edge ide1
169: 14266 0 IO-APIC-level libata, uhci_hcd:usb4, eth0
177: 0 0 IO-APIC-level DIVA 4BRI 6509
185: 0 0 IO-APIC-level Intel ICH5
193: 0 0 IO-APIC-level ehci_hcd:usb1
201: 0 0 IO-APIC-level uhci_hcd:usb2, uhci_hcd:usb5
209: 0 0 IO-APIC-level uhci_hcd:usb3
NMI: 0 0
LOC: 284472 284471
ERR: 0
MIS: 0



[root@pbx proc]# lsmod | grep diva
divas 68944 0
divadidd 14660 1 divas




[root@pbx proc]# cat /etc/modprobe.conf
alias eth0 e1000
alias scsi_hostadapter ata_piix
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd
alias eth1 divas
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-intel8x0
ds2k5
Newsterisk
 
Posts: 1
Joined: Thu Jan 04, 2007 9:46 am

Postby bkruse » Mon Jan 08, 2007 3:13 pm

um......for providers.....your currently going to have to set that up yourself

take a look at providers.conf or just (if its zaptel compatible) edit zapata.conf and make a group to dial to

-bkruse
bkruse
Site Admin
 
Posts: 878
Joined: Mon Dec 04, 2006 3:20 pm
Location: Huntsville, Alabama


Return to AsteriskNOW Support

Who is online

Users browsing this forum: No registered users and 1 guest