Multiple extesions regsitered on Cisco 7960

Get help with installing and running AsteriskNOW.

Moderators: Moderator, Support

Multiple extesions regsitered on Cisco 7960

Postby dwebb » Tue Jul 31, 2007 11:32 am

I have a Cisco 7960 with 6 lines. I want to regsiter 1 extension (6001) to lines 1 thru 5 and 1 extension (6050) to line 6.

The phone accepts incoming calls correctly on the proper lines, but when trying to place outgoing calls on lines 1-5 (Ext 6001) I get the following messages in the sip debug output.

<------------->
--- (19 headers 13 lines) ---
Sending to 192.168.1.169 : 5060 (NAT)
Using INVITE request as basis request - 00062825-dd52000c-548a395f-316b226a@192.168.1.169
Found peer '6050'
[Jul 31 11:12:50] WARNING[5209]: chan_sip.c:8190 check_auth: username mismatch, have <6050>, digest has <6001>
[Jul 31 11:12:50] NOTICE[5209]: chan_sip.c:13486 handle_request_invite: Failed to authenticate user "David Webb" <sip:6001@192.168.1.13>;tag=00062825dd5201a5070513b4-2da84749



I found a similar situation at this post:
http://forums.digium.com/viewtopic.php?=&p=43656

and I then added this line to my sip.conf file

Code: Select all
insecure=port,invite


Once I did that, I am able to make outbound calls on the lines registered to extension 6001, but when placed they use the extension 6050 settings (like the caller ID displayed).

I need to make outband calls as 6001 (on lines 1-5) and outbound calls as 6050 (on line 6) and have the lines behave independently of one another. It looks now like the "insecure=port,invite" just fools the PBX into letting me make a call as if I was extension 6050 from extension 6001.

Please help. I am hoping this is just a setting on the PBX, but maybe a bug. Thank you!
dwebb
Newsterisk
 
Posts: 4
Joined: Sun Jul 29, 2007 9:33 am

Return to AsteriskNOW Support

Who is online

Users browsing this forum: No registered users and 3 guests