Hi all,
I have strange problem that I can not solve and I need help. I have asterisk 11.3 and centos 6.5. I am connected to my provider via SIP trunk, and he supports t.38. I configured ciscoSPA232D ATA Line and connected it to my Asterisk PBX. I also configured extensions, incoming and outgoing calls etc. and everything is working. However, I am able to send faxes to the remote machine but I have problems with receiving faxes. I tried to receive fax with different fax machines but I got just half of the page ! I also try to send from different fax numbers and the sittuation is same, I receive just half of the page. I am not expert with fax debbuging but from the wireshark trace EOP is missing . I tried to upload screenshots but I've got could not upload attachment message. If you need additional information please let me know I can add sip debug or something similar.
[sip-trunk]
username,secret,host...
type=peer
sendrpid=no
nat=yes
context=from-trunk
insecure=port,invite
canreinvite=no
disallow=all
allow=alaw&ulaw&g729
t38pt_udptl=yes
extension config
[0049XXXXXX]
dtmfmode=rfc2833
canreinvite=no
context=from-internal
host=dynamic
trustrpid=yes
sendrpid=no
type=friend
nat=no
port=5060
qualify=yes
qualifyfreq=60
transport=udp
callcounter=yes
faxdetect=no
Line 1 config CiscoSPA232D
Preferred Codec:G711u
G729a Enable:yes
G726-32 Enable: yes
FAX V21 Detect Enable: yes
FAX CNG Detect Enable: yes
FAX Codec Symmetric: yes
FAX Passthru Method: reINVITE
FAX Process NSE: yes
FAX Disable ECAN: no
FAX Enable T38: yes
FAX T38 Redundancy: 1
FAX T38 ECM Enable: yes