T.30 fax receiving

Community-based Support for users of Free Fax For Asterisk

T.30 fax receiving

Postby sethsdad0627 » Thu May 21, 2009 2:47 pm

I have a DELL Multifunction Fax machine that appears to want to send it's fax in T.30 format. Here's my fax log

-- Executing [fax@default:1] Set("DAHDI/1-1", "GLOBAL(CALLERIDNUM)=09051242938455") in new stack
== Setting global variable 'CALLERIDNUM' to '09051242938455'
-- Executing [fax@default:2] Set("DAHDI/1-1", "GLOBAL(FAXFILE)=/var/spool/asterisk/fax/09051242938455.tif") in new stack
== Setting global variable 'FAXFILE' to '/var/spool/asterisk/fax/09051242938455.tif'
-- Executing [fax@default:3] Verbose("DAHDI/1-1", "Write Fax") in new stack
Write Faxx*CLI>
-- Executing [fax@default:4] Set("DAHDI/1-1", "GLOBAL(FAXFILENOEXT)=/var/spool/asterisk/fax/09051242938455") in new stack
== Setting global variable 'FAXFILENOEXT' to '/var/spool/asterisk/fax/09051242938455'
-- Executing [fax@default:5] Set("DAHDI/1-1", "FAXOPT(filename)=/var/spool/asterisk/fax/09051242938455.tif") in new stack
[May 21 15:40:55] WARNING[4047]: res_fax.c:1792 acf_faxopt_write: channel 'DAHDI/1-1' set FAXOPT(filename) to '/var/spool/asterisk/fax/09051242938455.tif' is unhandled!
-- Executing [fax@default:6] Set("DAHDI/1-1", "FAXOPT(ecm)=yes") in new stack
-- Executing [fax@default:7] Set("DAHDI/1-1", "FAXOPT(headerinfo)=MY FAXBACK RX") in new stack
-- Executing [fax@default:8] Set("DAHDI/1-1", "FAXOPT(localstationid)=12345") in new stack
-- Executing [fax@default:9] Set("DAHDI/1-1", "FAXOPT(minrate)=2400") in new stack
-- Executing [fax@default:10] Set("DAHDI/1-1", "FAXOPT(maxrate)=14400") in new stack
[May 21 15:40:55] ERROR[4047]: pbx.c:1551 ast_func_read: Function not registered
-- Executing [fax@default:11] NoOp("DAHDI/1-1", "FAXOPT(ecm) : ") in new stack
-- Executing [fax@default:12] ReceiveFAX("DAHDI/1-1", "/var/spool/asterisk/fax/09051242938455.tif|ds") in new stack
-- Channel 'DAHDI/1-1' is receiving fax '/var/spool/asterisk/fax/09051242938455.tif'
-- Channel 'DAHDI/1-1' fax session '11' started
-- Channel 'DAHDI/1-1' fax session '11', [ 000.004397 ], STAT_EVT_STRT_RX st: IDLE rt: IDLENSRX
-- Channel 'DAHDI/1-1' fax session '11', [ 000.005073 ], STAT_EVT_RX_HW_RDY st: WT_RX_HW_RDY rt: RRDYNHRY
-- Channel 'DAHDI/1-1' fax session '11', [ 000.005208 ], STAT_INFO_CSI
-- Channel 'DAHDI/1-1' fax session '11', [ 000.005057 ], >>>>>> (to stack) completed sending ' 0' frames ( 0 ms) of 'energy ', now sending 'energy '.
-- Channel 'DAHDI/1-1' fax session '11', [ 000.005465 ], STAT_INFO_DIS
-- Channel 'DAHDI/1-1' fax session '11', [ 000.005862 ], <<<<<< (to chan) completed sending ' 0' frames ( 0 ms) of 'energy ', now sending 'energy '.
-- Channel 'DAHDI/1-1' fax session '11', [ 005.196156 ], STAT_EVT_TX_V21_DONE st: WT_DIS_RSP rt: WDSRNT21
-- Channel 'DAHDI/1-1' fax session '11', [ 007.516113 ], STAT_INFO_TSI
-- Channel 'DAHDI/1-1' fax session '11', [ 007.936103 ], STAT_INFO_DCS
-- Channel 'DAHDI/1-1' fax session '11', [ 007.936223 ], STAT_EVT_DCS st: WT_DIS_RSP rt: WDSRNDCS
-- Channel 'DAHDI/1-1' fax session '11', [ 007.936308 ], STAT_NEG_V17_9600
-- Channel 'DAHDI/1-1' fax session '11', [ 007.936389 ], STAT_NEG_MMR
-- Channel 'DAHDI/1-1' fax session '11', [ 007.936460 ], STAT_NEG_A4
-- Channel 'DAHDI/1-1' fax session '11', [ 007.936545 ], STAT_NEG_RES_204x98
-- Channel 'DAHDI/1-1' fax session '11', [ 007.936623 ], STAT_NEG_ECM
-- Channel 'DAHDI/1-1' fax session '11', [ 007.936724 ], STAT_EVT_SW_ECM st: WT_DIS_RSP rt: WDSRNSWE
-- Channel 'DAHDI/1-1' fax session '11', [ 011.136077 ], STAT_EVT_RX_TRN_END st: RCV_ECM_TRN rt: RTCFNERT
-- Channel 'DAHDI/1-1' fax session '11', [ 011.136207 ], STAT_FRM_CFR
-- Channel 'DAHDI/1-1' fax session '11', [ 012.336075 ], STAT_EVT_TX_V21_DONE st: RCV_ECM_STRT rt: RECMNT21
-- Channel 'DAHDI/1-1' fax session '11', [ 018.936034 ], STAT_EVT_T2_EXP st: RCV_ECM_STRT rt: RESTNT2X
-- Channel 'DAHDI/1-1' fax session '11', [ 018.936248 ], STAT_EVT_GO_TO_B st: RCV_ECM_STRT rt: XXXXNGOB
-- Channel 'DAHDI/1-1' fax session '11', [ 025.430018 ], STAT_EVT_HW_CLOSE st: WT_HW_CLS rt: WCLSNCLS
-- Channel 'DAHDI/1-1' fax session '11', [ 025.430483 ], STAT_SES_COMPLETE
-- Channel 'DAHDI/1-1' fax session '11' is complete, result: 'FAILED' (FAX_FAILURE_PROTOCOL_ERROR), error: '3RD_T2_TIMEOUT', pages: 0, resolution: 'unknown', transfer rate: '2400', remoteSID: ''
-- Executing [fax@default:13] System("DAHDI/1-1", "/usr/bin/fax2mail -t -f 09051242938455 "" 2054029995 RecipName danny@debsinc.com /var/spool/asterisk/fax/09051242938455 p") in new stack
-- Executing [fax@default:14] Hangup("DAHDI/1-1", "") in new stack
== Spawn extension (default, fax, 14) exited non-zero on 'DAHDI/1-1'
-- Hungup 'DAHDI/1-1'


Any ideas how to override the protocol?
sethsdad0627
Oldsterisk
 
Posts: 208
Joined: Tue Nov 04, 2008 9:15 am

Re: T.30 fax receiving

Postby gabriela96cbno » Tue Oct 27, 2009 11:32 am

look in javamexico.org
posicionamiento
gabriela96cbno
Newsterisk
 
Posts: 1
Joined: Tue Oct 27, 2009 11:30 am


Return to Fax For Asterisk

Who is online

Users browsing this forum: No registered users and 1 guest