X100P and incoming fax with recepcionist

Community-based Support for users of Free Fax For Asterisk

X100P and incoming fax with recepcionist

Postby d_loayza » Thu Aug 12, 2010 8:18 pm

I have asterisk, freePBX and one X100P card, all configured and running on my SME server.

The problem is: when an incoming call, I can take this with the SIP extension that is configured for it, but when transfer the call to the 666 to receive a fax through the system, the system takes the call but never responds fax tone, then the issuer hang up the call .

With the following commands:

[root@voip-server ~]# asterisk -r
Asterisk 1.4.31, Copyright (C) 1999 - 2010 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
Connected to Asterisk 1.4.31 currently running on voip-server (pid = 4974)
Verbosity is at least 3
voip-server*CLI> dahdi show channel 1
Channel: 1r*CLI>
File Descriptor: 10
Span: 1
Dialing: no
Context: from-zaptel
Caller ID:
Calling TON: 0
Caller ID name:
Destroy: 0
InAlarm: 0
Signalling Type: FXS Kewlstart
Radio: 0
Owner: <None>
Real: <None>
Callwait: <None>
Threeway: <None>
Confno: -1
Propagated Conference: -1
Real in conference: 0
DSP: no
Relax DTMF: no
Dialing/CallwaitCAS: 0/0
Default law: ulaw
Fax Handled: no
Pulse phone: no
Echo Cancellation: 128 taps, currently OFF
Actual Confinfo: Num/0, Mode/0x0000
Actual Confmute: No
Hookstate (FXS only): Onhook

I see certain things I would like to change to see if it resolves the problem and improve the audio quality, but I don´t know how.

Fax Handled: no --> Fax Handled: yes
Echo Cancellation: 128 taps, currently OFF --> Echo Cancellation: 128 taps, currently ON

Nor I know how telling to the FreePBX´s fax system that detection method for faxes is Zaptel (remember I have a X100P card), the option is only for trunks.

Once work well only for fax dedicated trunk, by modifying the settings of the trunks, but this is not the case, I want to transfer the call to fax through the system 666 when necessary.

somebody help me? :-D

Posts: 2
Joined: Tue Aug 10, 2010 6:27 pm

Return to Fax For Asterisk

Who is online

Users browsing this forum: No registered users and 1 guest