AsteriskNow Outbound CallerID

General discussions about AsteriskNOW.

Moderators: Moderator, Support

AsteriskNow Outbound CallerID

Postby minicop » Sat Nov 05, 2011 7:54 am

Hi all,
I have installed AsteriskNow 1.7.1 and setup a SIP trunk to another Asterisk server. The Asterisk server have extension 1234.

I have create 5 users with extension 210 to 214 on the AsteriskNow. I didn't have any callerid set for the outgoing call rule or the SIP trunk. As I want to use the user extension number as the callerid.

When I make a call from 210 to 214 to the extension 1234, the call is being routed correctly. But the caller ID shown in extension 1234 is "asterisk" not the extension number of 210 to 214.

When I dial from 1234 to extension 210, the extension 1234 number will be shown.

Is there any setting in AsteriskNow I need to set to enable to show the calling party extension number?

Posts: 1
Joined: Wed Jan 16, 2008 3:00 am

Return to AsteriskNOW General

Who is online

Users browsing this forum: No registered users and 1 guest