Various channel for inbound route

[tella]

Please give me an idea :::

I have both analog and digital cards installed on my asterisk server, which i ve setting up the same group id for these two cards ,analog card with 4 port is on the group 1 /g1 ... digital card span 1 with a E1 trunk is on the group 1 / g1... it's because i want to send all inbound through the system
it's that will work >>>

Code: Select all

[voip]
exten =>s,1,Dial(DAHDI/g1,20,rt)
exten =>s,2,Dial(SIP/100&SIP/102&SIP/103&SIP/104&SIP/105)


Thanks !

[navaismo]

Take a look to the documentation at: www.asteriskdocs.org that will help you a lot with your doubts and your dialplan logic.