Zaptel not seeing kernel source, Fedora 5

Get help with installing, upgrading and running Asterisk.

Moderators: muppetmaster, Moderator, Support

Zaptel not seeing kernel source, Fedora 5

Postby varelg » Sat Jun 03, 2006 1:08 pm

Hi,
While attempting to install zaptel an error was reported that no kernel source is present:
#cd /usr/src/zaptel
make clean
/*some text about activity of "make clean", no erors reported*/
make
/*activity during make. At the end, the following error is reported:
"You do not appear to have the sources for the 2.6.15-1.2054_FC5 kernel installed. make: *** [linux 26] Error*/
Although prevoiusly downloaded and installed kernel source via RPM from Fedora web site:
#rpm -ivh kernel-2.6.15-1.1955_FC5.src.rpm
and after:
#rpmbuild -bp --target=noarch /usr/src/redhat/SPECS/kernel-2.6.spec
Done all this as a root on Fedora Core 5 machine, directory structure of usr:
/usr/src/redhat/BUILDS, RPMS,SOURCES, SPECS, SRPMS... the BUILD directory contains kernel-2.6.15/linux-2.6.15/arch, block, crypto, Documentation, drivers directories...
Is the kernel source located in a wrong directory so zaptel can't find it? How is this to be repaired?
Vamos a la playa!
varelg
Oldsterisk
 
Posts: 58
Joined: Thu Dec 21, 2006 10:56 pm

Postby konsultex » Sat Jun 03, 2006 4:22 pm

I think you need to do a "make linux26" not just "make".
Miguel
konsultex
Newsterisk
 
Posts: 25
Joined: Thu Dec 21, 2006 10:56 pm

Postby varelg » Sat Jun 03, 2006 11:48 pm

Even after "make linux26" I get the same error message...
Vamos a la playa!
varelg
Oldsterisk
 
Posts: 58
Joined: Thu Dec 21, 2006 10:56 pm

RE: Zaptel not seeing kernel source, Fedora 5

Postby mraley » Mon Jun 05, 2006 8:04 am

Did you install the kernel source when you set up the box? I've found Red Hat Distro's notoriously bad about including kernel source. That's a set of packages I've specifically had to select at install time.

1) ensure you do in fact have the kernel source. If not, download it using rpm/yum/whichever you prefer

2) Once you have the correct Kernel source for your version of the kernel, make sure you have that source linked in the /usr/src/ or whatever your zaptel base install directory is see: http://www.voip-info.org/wiki/view/Aste ... stallation

3) fix the Kernel Source typo problem
http://forums.digium.com/viewtopic.php?p=17861&

4) got back to make clean and start again.

5) don't forget to recompile astrisk afterwards.
ABBA proves that the swedes are evil.
mraley
Newsterisk
 
Posts: 21
Joined: Thu Dec 21, 2006 10:56 pm

Postby Zion800 » Mon Jun 05, 2006 1:28 pm

I am a bit of a newb when it comes to working with Red Hat. I am having the same problem. When I do 'Make clean" for Zaptel-1.2.6 I get [clean] Error 2. The line before that, it says "/lib/modules/2.6.16-1.2122_FC5/build: No such file or directory. Stop."

I went to /lib/modules/2.6.16-1.2122_FC5 and realized that there is a broken link pointing to "../../../usr/src/kernels/2.6.16-1.2122_FC5-x86_64" When I went to /usr/src/kernels I realized that there was a directory there called 2.6.16-1.2080_FC5-x86_64. I renamed that directory to ..../2.6.16-1.2122_FC5-x86_64 and I was able to clean, make, and install Zaptel.

Since I'm new to Linux, I'm not sure what the repurcussions of what I did are, but I'll let you guys know.
Zion800
Newsterisk
 
Posts: 41
Joined: Thu Sep 22, 2005 6:56 pm

Postby varelg » Tue Jun 06, 2006 12:55 am

mraley, when setting up the box there wasn't any option for installing kernel source.
Looks like I need only kernel headers, since I guess zaptel is yet another driver. So I downloaded and rpm'd the kernel-devel package but problem with zaptel reporting missing kernel source persists:
#cd usr/src
#rpm -ivh kernel-devel-2.6.15-1.2054_FC5.i586.rpm
and then same warning appears about missing header V3 DSA signature.
Decided to ignore the warning and proceeded to untaring zaptel but on install-time the same message about missing kernel source appeared.
Am really wondering if ANYONE else got FC5 to work with zaptel and what is to be done about kernel headers and zaptel not seeing them.
Vamos a la playa!
varelg
Oldsterisk
 
Posts: 58
Joined: Thu Dec 21, 2006 10:56 pm

FC5 proposed solution

Postby ubaggili » Tue Jun 06, 2006 11:59 pm

It took me a while to get things running smoothly, although the path to success can be very short with some direction.

I recommend for all FC5 users to do the following and confirm whether it works or not:

Those 2 updates will update the kernel to the latest along with the necessary sources and linking, etc.
1-
yum install kernel
2-
yum install kernel-devel
3-
reboot into the new kernel (in my case, the upgrade was from 2.6.15-1.2054_FC5 to 2.6.16-1.2122_FC5 (you can check with uname -r)

Now go ahead and compile zaptel again. All should work fine. No need to modify any other files. If you have an problem, please reply back.
ubaggili
Newsterisk
 
Posts: 5
Joined: Thu Dec 21, 2006 10:56 pm

Postby vlad » Wed Jun 14, 2006 11:42 am

ubaggili,
upgrading kernel, kernel-devel and rebooting worked for me.
vlad
Newsterisk
 
Posts: 1
Joined: Wed Nov 22, 2006 12:40 pm

Postby varelg » Wed Jun 14, 2006 2:08 pm

OK guys, so how do you upgrade the kernel without yum and connection to Internet from Linux box?
Sorry for asking this, but am sucha linux newbie...
Vamos a la playa!
varelg
Oldsterisk
 
Posts: 58
Joined: Thu Dec 21, 2006 10:56 pm

Postby william_pre » Thu Jun 29, 2006 10:28 am

Hi ubaggili,

I did exactly as you mentioned. See below error:
---------------------------------------------------
/lib/modules/2.6.17-1.2139_FC5smp/build
You do not appear to have the sources for the 2.6.17-1.2139_FC5smp kernel installed.
make: *** [linux26] Error 1
[root@asterisk1 zaptel-1.2.6]# uname -r
2.6.17-1.2139_FC5smp
[root@asterisk1 zaptel-1.2.6]#
------------------------------------------------
do i need to do any additional updates?

thanks in advance.

Sekhar.
william_pre
Oldsterisk
 
Posts: 73
Joined: Thu Dec 21, 2006 10:56 pm

Postby ubaggili » Thu Jun 29, 2006 10:32 am

Please post the outcome of the following commands:

rpm -q kernel

rpm -q kernel-devel

and

uname -r

Thanks.
ubaggili
Newsterisk
 
Posts: 5
Joined: Thu Dec 21, 2006 10:56 pm

Postby william_pre » Thu Jun 29, 2006 11:10 am

Hi ubaggili,

Thanks the quick reply,
here is the output requested.

/lib/modules/2.6.17-1.2139_FC5smp/build
You do not appear to have the sources for the 2.6.17-1.2139_FC5smp kernel installed.
make: *** [linux26] Error 1
[root@fedora zaptel-1.2.6]# rpm -q kernel
kernel-2.6.17-1.2139_FC5
[root@fedora zaptel-1.2.6]# rpm -q kernel-devel
kernel-devel-2.6.17-1.2139_FC5
[root@fedora zaptel-1.2.6]# uname -r
2.6.17-1.2139_FC5smp
[root@fedora zaptel-1.2.6]#

Please let me know what could be wrong.

thanks
sekhar.
william_pre
Oldsterisk
 
Posts: 73
Joined: Thu Dec 21, 2006 10:56 pm

Postby learner » Fri Jun 30, 2006 4:42 am

Do not forget that you must have the source of the running kernel... I would suggest download the source (for FC there might be a .rpm file which contains the source of the kernel you want to install) and then compile this source.

Once compiled, just intall and add your second and own compiled kernel to the list of system kernel in order to use it at boot time.
learner
Newsterisk
 
Posts: 20
Joined: Tue Sep 27, 2005 1:18 pm

Postby ubaggili » Fri Jun 30, 2006 7:32 am

Spaquet: I am able to compile with just the kernel-devel package installed. I have done it just about 10 times in the last month... I'm not totally convinced that one needs the sources...

Sekhar: I'm curious about the order you ran the Yum commands I listed:

Did you run them in the specified order?

Did you reboot after u installed the 2 packages?

If the answer is yes to the above, here is what I'd like you to do:
1- yum remove kernel-devel
2- yum install kernel-devel
reboot
make; make install for libpri
then, make; make install for zaptel

Please try this in the exact order that is specified, and let us know what you find.
thanks,
ubaggili
ubaggili
Newsterisk
 
Posts: 5
Joined: Thu Dec 21, 2006 10:56 pm

Postby fredtheman » Sat Jul 01, 2006 9:37 am

sekhar wrote:
Code: Select all
/lib/modules/2.6.17-1.2139_FC5smp/build
You do not appear to have the sources for the 2.6.17-1.2139_FC5smp kernel installed.
make: *** [linux26] Error 1


Please let me know what could be wrong.


On Fedora 5, the symlink /lib/modules/<kernel version>/build is pointing to the wrong directory:

1. cd /lib/modules/`uname -r`
2. ll (that's two L's)
3. rm build
4. ln -s /usr/src/kernels/YOUR VERSION OF THE KERNEL build
5. ll
6. cd /usr/src/zaptel
7. make clean
8. make linux26 (don't know if "make linux" is bad or what)

Hope that helps
fredtheman
Oldsterisk
 
Posts: 73
Joined: Thu Dec 21, 2006 10:56 pm

Postby cclambie » Thu Jul 06, 2006 6:36 pm

Hi All,

I know these messages are all a little old now, but..
I am having the same problem as specified in this post and many others.

I have got the error
You do not appear to have the sources for the 2.6.17-1.2139_FC5smp kernel installed
make: *** [linux26] Error 1

I have followed all the advice on this forum, even to the point of downloading and recompiling the latest kernel, I think I did it right...
I am however still getting this error.

I am V new to Linux...so I don't even know the basics, have to look up even what ll meant.

can anyone give me some tips on
A. Checking the kernel installed and loading is the latest one (2.6.17.3)
B. Directing Zaptel to this new kernel instead of the old one
C. anything else?

Thank you in advance

btw:
Ihave tried FredTheMans suggestions, also the yum install kernel-devel, and yum remove stuff....i am lost...
cclambie
Newsterisk
 
Posts: 4
Joined: Tue Dec 05, 2006 5:54 am

Postby baconbuttie » Fri Jul 07, 2006 12:18 am

cclambie wrote:You do not appear to have the sources for the 2.6.17-1.2139_FC5smp kernel installed

it still can't find the kernel sourcode for the kernel you have installed. when you installed your current kernel, did you download and compile from source, or was it a package manager ? if the latter try using the same package manager to install "kernel-sourcecode". you will proably get a multi options error back, but then you can append # and your kernel version to get the right one.
baconbuttie
Moves Like Spencer
 
Posts: 2657
Joined: Tue May 16, 2006 6:32 am
Location: Forest of Dean, Gloucestershire, UK.

Postby vinod.vijayan » Fri Jul 07, 2006 12:31 am

To determine if your machine hardware is one of i386,i586,i686 type :-
uname -a

Then download the appropriate kernel and kernel-devel rpms(not source rpms) from http://download.fedora.redhat.com/pub/f ... es/5/i386/

and upgrade the existing packages with

rpm -Uvh [package-name]
Today is a new day.
vinod.vijayan
Oldsterisk
 
Posts: 223
Joined: Thu Dec 21, 2006 10:56 pm

Postby cclambie » Fri Jul 07, 2006 3:59 am

ok, thanks for the quick responce:

baconbuttie - I downloaded and installed the source from the source, no packages where used (I think - no rpm was used?)

vinod.vijayan -
the results
[root@localhost mail]# uname -a
Linux localhost.localdomain 2.6.17-1.2139_FC5smp #1 SMP Fri Jun 23 13:12:06 EDT 2006 i686 i686 i386 GNU/Linux

what would be the most appropriate source for this?

I don't really get this whole linux thing yet as a hard core windows, but I am willing to be converted....I am really. Thank you for your patience if I ask some blatently obvious question about linux....I am but a mere windows geek.
cclambie
Newsterisk
 
Posts: 4
Joined: Tue Dec 05, 2006 5:54 am

Postby Tordah » Fri Jul 07, 2006 4:26 am

You can always use yum to download the package for you, makes life a little simpler.
Tordah
Newsterisk
 
Posts: 8
Joined: Thu Dec 21, 2006 10:56 pm

Postby vinod.vijayan » Fri Jul 07, 2006 5:27 am

Today is a new day.
vinod.vijayan
Oldsterisk
 
Posts: 223
Joined: Thu Dec 21, 2006 10:56 pm

Postby vinod.vijayan » Fri Jul 07, 2006 5:32 am

>>You can always use yum to download the package for you, makes life a little simpler.

A hard life teaches you more .. Just Kidding but its really the truth
Today is a new day.
vinod.vijayan
Oldsterisk
 
Posts: 223
Joined: Thu Dec 21, 2006 10:56 pm

Postby cclambie » Fri Jul 07, 2006 10:17 pm

Hi Vinod.Vijayan,

Thanks for the tip, I am not sure if it worked though?

responce:

[root@localhost Desktop]# rpm -Uvh kernel-2.6.17-1.2145_FC5.i686.rpm
Preparing... ########################################### [100%]
package kernel-2.6.17-1.2145_FC5 is already installed
[root@localhost Desktop]# rpm -Uvh kernel-devel-2.6.17-1.2145_FC5.i686.rpm
Preparing... ########################################### [100%]
package kernel-devel-2.6.17-1.2145_FC5 is already installed

maybe it is something else?

Cheers & thanks for your patience and help!
cclambie
Newsterisk
 
Posts: 4
Joined: Tue Dec 05, 2006 5:54 am

Postby vinod.vijayan » Sat Jul 08, 2006 4:56 am

comming back:

the output on uname -a
>>Linux localhost.localdomain 2.6.17-1.2139_FC5smp #1 SMP Fri Jun 23 13:12:06 EDT 2006 i686 i686 i386 GNU/Linux

shows that you are using a Hyper Threaded processor.
This processor will require smp packages and not plain packages.

Refer this link:-
http://www.fedoraforum.org/forum/showth ... post562242

so that would be any one of the kernel-smp and kernel-smp-devel rpms.
Most probably
http://download.fedora.redhat.com/pub/f ... 5.i686.rpm
http://download.fedora.redhat.com/pub/f ... 5.i686.rpm

try and see if this helps....
Today is a new day.
vinod.vijayan
Oldsterisk
 
Posts: 223
Joined: Thu Dec 21, 2006 10:56 pm

Postby cclambie » Sat Jul 08, 2006 8:12 am

thank you, thank you, thank you, thank you.....

compiling is working....yaah!

i appreciate all your help and support.....
And I am now a new Asterisk user....so will probably be bothering you all under another thread somewhere to configure and play with it...but thanks!
cclambie
Newsterisk
 
Posts: 4
Joined: Tue Dec 05, 2006 5:54 am

Postby muppetmaster » Sat Aug 26, 2006 12:11 am

vinod.vijayan wrote:comming back:

the output on uname -a
>>Linux localhost.localdomain 2.6.17-1.2139_FC5smp #1 SMP Fri Jun 23 13:12:06 EDT 2006 i686 i686 i386 GNU/Linux

shows that you are using a Hyper Threaded processor.
This processor will require smp packages and not plain packages.

Refer this link:-
http://www.fedoraforum.org/forum/showth ... post562242

so that would be any one of the kernel-smp and kernel-smp-devel rpms.
Most probably
http://download.fedora.redhat.com/pub/f ... 5.i686.rpm
http://download.fedora.redhat.com/pub/f ... 5.i686.rpm

try and see if this helps....


The last two links above no longer exist, and th smp components do not seem to exist here either:

http://download.fedora.redhat.com/pub/f ... updates/5/

But these do with the latest FC5 update:

http://download.fedora.redhat.com/pub/f ... 5.i686.rpm
http://download.fedora.redhat.com/pub/f ... 5.i686.rpm

Yum should really be smart enough to sort out which kernel you have and install the right one.
muppetmaster
Salt of the Asterisk
 
Posts: 1080
Joined: Thu Dec 21, 2006 10:56 pm
Location: San Carlos, CA

Postby Moonshine » Sat Aug 26, 2006 7:41 pm

Well I don't really think it's YUM's fault. People using the SMP kernels should be installing the SMP devel package rather then the normal one. IE:

yum install kernel-smp-devel

rather then

yum install kernel-devel

-James
Moonshine
Newsterisk
 
Posts: 1
Joined: Thu Dec 21, 2006 10:56 pm

Postby g_man » Sun Aug 27, 2006 1:42 pm

Don't know if it's still an issue, but when using FC5, apart from the usual:

# yum install kernel
# yum install kernel-devel

you must also use the following command:

# ln -s /lib/modules/latest-kernel-version/build /usr/src/linux-2.6

This was from the instructions from a long time ago, and if you were using the 2.6 kernel it was a must, else you couldn't do a "make linux26".

Again the dev's may have resolved this issue, but I still use if without fault.

G.
g_man
Newsterisk
 
Posts: 12
Joined: Thu Dec 21, 2006 10:56 pm

How to do it without Yum

Postby Hedora » Wed Sep 06, 2006 8:29 am

As one the memebers asked in this forum, can anyone please help on how to make programs see the source code without using the yum.

I am trying to configure the adsl modem (sagem 800) on a Fedora 5, and the driver I downloaded needs to see the source, I downloaded the rpm and the source was Put on /usr/src/redthat/SOURCES, but still when i run the configuration for the modem i get the error message couldnt find the kernel-source.

I tried to creat a sym link in the /usr/src directory, like
ln -s /usr/src/redhat/SOURCES/ linux but no use.(read it in help file)

I am using kernel 2.6.15 on a samsung R50 laptop. I had hard time configuring the ati driver because of the same problem (kernel-source) and most help files talk about Yum so im trying to fix the connection first to follow the yum thing, so please help me make solve this problem of source kernel not visible to different installers.(without the yum)

Thanks a lot.
Hedora
Newsterisk
 
Posts: 11
Joined: Thu Dec 21, 2006 10:56 pm

Postby Hedora » Wed Sep 06, 2006 12:56 pm

I found that the problem was from the source code was no compatible with the kernel, although they had the exact same name, maybe it has to do with i386 and i686 like mentionned above...

Anyway I installed a new kernel from source 2.6.15-prep, anyone knows the difference between that one and the 2.6.15-1.2054_FC5?

Even that didnt fix the problem, still cant load modules when installing drivers, so i tried the 2.6.17.11 but this time from source , not an rpm, everything went smooth until boot up, it hang : kernerl panic ... is it fedora???

Im really lost, anyone can help me with a link on fedora 5 and ati, or fedora 5 and sagem 800, or should i just give up installing it on a samsung laptop ans choose another disro? please help!!!!!
Hedora
Newsterisk
 
Posts: 11
Joined: Thu Dec 21, 2006 10:56 pm

Postby mitho7 » Mon Feb 05, 2007 10:18 pm

On Fedora 5, the symlink /lib/modules/<kernel version>/build is pointing to the wrong directory:

1. cd /lib/modules/`uname -r`
2. ll (that's two L's)
3. rm build
4. ln -s /usr/src/kernels/YOUR VERSION OF THE KERNEL build
5. ll
6. cd /usr/src/zaptel
7. make clean
8. make linux26 (don't know if "make linux" is bad or what)

Thanks to fredtheman, This help me a lot.

My build was pointing to 2.6.15, but my verision is 2.6.18 ....

That worked fine now, If anyone having problem try this first.
mitho7
Newsterisk
 
Posts: 9
Joined: Sun May 28, 2006 12:00 am

Zaptel can not install

Postby sammy_lim » Tue Feb 06, 2007 4:42 am

Hi guys,

I have the same problem on Fedora Core-6, I can not install Zaptel. I will switch the Fedora Core-6 to SUSE-10, could SUSE-10 have a SOX compiled with GSM support, as I know this software is use to make Asterisk Recording. Because SUSE-9 can not support SOX. Do anyone have an idea ?

Thanks
Sammy
sammy_lim
Newsterisk
 
Posts: 33
Joined: Tue Feb 06, 2007 4:08 am

Postby baconbuttie » Tue Feb 06, 2007 5:12 am

what's sox got to do with not being able to install Zaptel ??
baconbuttie
Moves Like Spencer
 
Posts: 2657
Joined: Tue May 16, 2006 6:32 am
Location: Forest of Dean, Gloucestershire, UK.

update 1st..........

Postby Jayandran » Tue Feb 06, 2007 11:41 am

hi there, follow this instructions....

step by step
1. yum -y install yum yum-fastestmirror
2. yum -y update
3. yum -y install cpp bison e2fsprogs-devel glibc-kernheaders glibc-headers glibc-devel gcc kernel-devel krb5-devel libogg-devel libxml2-devel libtiff-devel mysql mysql-devel mysql-server ncurses ncurses-devel openssl-devel subversion httpd php php-mysql php-gd zlib-devel

note: if you use dual processors replace "kernel-devel" with "kernel-smp-devel"

hope this will help you.
Jayandran
Newsterisk
 
Posts: 8
Joined: Sat Nov 25, 2006 8:38 am

Postby sammy_lim » Wed Feb 07, 2007 3:01 am

SUSE-9 can not support SOX ( Asterisk recording application ), I hope SUSE-10 can support it. Right now, I still find suitable Linux Distro for Zaptel and SOX application. But I'll try Fedora Core-6 first.

Thanks for your info Jayandran, very helpful. :idea: I will try again and again, until its running.
sammy_lim
Newsterisk
 
Posts: 33
Joined: Tue Feb 06, 2007 4:08 am

Postby dtdionne » Wed Feb 07, 2007 3:19 am

I had this EXACT same problem and it took me the better part of a night to fix...which actually really ticked me off. Anyway, I have not read all of the posts here, but I did see a few that hit on the correct fix..

The kicker is this word "Kernel Source" that everyone is throwing around when it's not the ACTUAL kernel source you need, what you REALLY need is the kernel-dev packages and then you need to make like 3 symbolic links....here were my steps

[house]# rpm -Uvh kernel-devel-2.6.18-1.2257.fc5.x86_64.rpm
[house]# ln -s /usr/src/kernels/ linux-2.6
[house]# ln -s /usr/src/kernels/2.6.18-1.2257.fc5-x86_64/ /lib/modules/2.6.18-1.2257.fc5/build
[house]# ln -s /lib/modules/2.6.18-1.2257.fc5/build/ source
[house]# cd /usr/src/
[house]# rm -rf zaptel-1.4.0
[house]# tar -zxvf zaptel-1.4.0.tar.gz
[house]# cd zaptel-1.4.0
[house]# ./configure
[house]# make
[house]# make install
[house]# vi /etc/zaptel.conf
[house]# modprobe wctdm
[house]# ztcfg -vv

Zaptel Version: 1.4.0
Echo Canceller: MG2
Configuration
======================


Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

2 channels configured.


Feel free to PM me if you still can't get it.
dtdionne
Newsterisk
 
Posts: 3
Joined: Tue Jan 16, 2007 7:49 am

Postby sammy_lim » Thu Feb 08, 2007 2:39 am

I have follow these steps on My Fedora Core-6 :
nstall cpp bison e2fsprogs-devel glibc-kernheaders glibc-headers glibc-devel gcc kernel-devel krb5-devel libogg-devel libxml2-devel libtiff-devel mysql mysql-devel mysql-server ncurses ncurses-devel openssl-devel subversion httpd php php-mysql php-gd zlib-devel

But it still errors:
# ./configure
#configure: *** Zaptel build successfully configured ***
#make linux26
#CC /usr/local/src/zaptel-1.4.0/zttranscode.mod.o
LD [M] /usr/local/src/zaptel-1.4.0/zttranscode.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'

Then :
#rpm -Uvh kernel-devel-2.6.18-1.2798.fc6.i686.rpm
#ln -s /usr/src/kernels/ linux-2.6
# ln -s /usr/src/kernels/.6.18-1.2798.fc6.i686/ /lib/modules/2.6.18-1.2257.fc5/build
# ln -s /lib/modules/.6.18-1.2798.fc6/build/ source
# cd /usr/src/zaptel-1.4.0
# ./configure
# make linux26
make[2]: Leaving directory `/usr/local/src/zaptel-1.4.0/menuselect'
make[1]: Leaving directory `/usr/local/src/zaptel-1.4.0/menuselect'
You do not appear to have the sources for the 2.6.19-1.2895.fc6 kernel installed.
make: *** [linux26] Error 1

I have find in the Fedora Core-6 package, its have: Openpbx-zaptel-1.2.3.rc2.svn2282.fc6.i386-zaptel modules for openpbx.
Is it zaptel driver ?

Have an idea ? it make me very curious...
sammy_lim
Newsterisk
 
Posts: 33
Joined: Tue Feb 06, 2007 4:08 am

Postby baconbuttie » Thu Feb 08, 2007 3:26 am

have you tried
Code: Select all
yum install kernel-headers
?
baconbuttie
Moves Like Spencer
 
Posts: 2657
Joined: Tue May 16, 2006 6:32 am
Location: Forest of Dean, Gloucestershire, UK.

Postby sammy_lim » Thu Feb 08, 2007 9:27 pm

When I upgrade to kernel-2.6.1.19-1.2895.fc6, it become worse : no kernel source installed.
Right now I use Kernel-2.6.18-1.2798.fc6-i686........

#./configure
configure: *** Zaptel build successfully configured ***
#make linux26
LD [M] /usr/local/src/zaptel-1.4.0/ztdynamic.ko
CC /usr/local/src/zaptel-1.4.0/zttranscode.mod.o
LD [M] /usr/local/src/zaptel-1.4.0/zttranscode.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'

[root@localhost zaptel-1.4.0]# yum install kernel-headers
Loading "installonlyn" plugin
Setting up Install Process
Setting up repositories
core 100% |=========================| 1.1 kB 00:00
updates 100% |=========================| 1.2 kB 00:00
extras 100% |=========================| 1.1 kB 00:00
Reading repository metadata in from local files
primary.xml.gz 100% |=========================| 426 kB 00:39
################################################## 1087/1087
primary.xml.gz 100% |=========================| 1.8 MB 02:30
################################################## 5836/5836
Parsing package install arguments
Nothing to do

[root@localhost zaptel-1.4.0]#

Thanks
sammy_lim
Newsterisk
 
Posts: 33
Joined: Tue Feb 06, 2007 4:08 am

Postby baconbuttie » Fri Feb 09, 2007 12:05 am

baconbuttie
Moves Like Spencer
 
Posts: 2657
Joined: Tue May 16, 2006 6:32 am
Location: Forest of Dean, Gloucestershire, UK.


Return to Asterisk Support

Who is online

Users browsing this forum: No registered users and 1 guest